欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
SK40P数控车床尾座数控化改造方法及实现
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省教育厅重点资助项目(D20131801)


NC Transformation Method and Implementation for Tailstock of NC Lathe SK40P
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出在SK40P数控车床基础上对其尾座进行数控化改造的方案,以实现油缸盖轴类零件批量生产时车削、钻削工序集中的工艺流程需求。该方案采用PLC、伺服驱动和伺服电动缸组成的系统带动尾座、锥柄套筒及钻头进给实现中心孔的自动钻削加工,原车床数控系统GSK980TD与PLC之间通过I/O端口实现通信,构成主从式结构。实际运行表明,该改造方案拓展了普通数控车床的工艺能力。

    Abstract:

    A scheme of the tailstock NC transformation was introduced to meet the process integrated requirements of the turning and drilling during batch production of some axial parts base on NC lathe SK40P. In this retrofit scheme, the system consisted of PLC, servo drive and servo electric cylinder was used to drive the tailstock, taper shank sleeve and drill in order to further implement the automatic drilling processing of center hole. In the scheme, the masterslave structure was built, the master microcontroller was the original CNC system GSK980TD, the slave was the PLC. The communication between the above was realized by the aid of I/O ports. Practice shows that the retrofit scheme extends the ordinary NC lathe process ability.

    参考文献
    相似文献
    引证文献
引用本文

刘凌云,罗敏,陈志楚,吴岳敏. SK40P数控车床尾座数控化改造方法及实现[J].机床与液压,2017,45(2):69-73.
. NC Transformation Method and Implementation for Tailstock of NC Lathe SK40P[J]. Machine Tool & Hydraulics,2017,45(2):69-73

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2015-12-29
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-05-09
  • 出版日期: