文章摘要
张文俊,段瑞永,夏亮.数控车削活动组合刀架的设计[J].机床与液压,2017,45(16):205-206
数控车削活动组合刀架的设计
Design of NC Movable Combined Tool Carrier
  
DOI:10.3969/j.issn.1001-3881.2017.16.054
中文关键词: 换刀  组合刀架  空行程
英文关键词: Tool change  Combined tool carrier  Empty stroke
基金项目:
作者单位E-mail
张文俊 黄冈师范学院机电工程学院 752319600@qq.com 
段瑞永 黄冈师范学院机电工程学院  
夏亮 黄冈师范学院机电工程学院  
摘要点击次数: 27
全文下载次数: 
中文摘要:
      针对现有数控车削加工换刀时刀架要移动到离加工零件较远的换刀点,提出一种新结构的刀架,活动刀座在底板上可自由组合,使换刀空行程短、装配方便,提高加工效率、降低制造成本。
英文摘要:
      In existing CNC turning, tool carrier should move to tool change point far away from the machining part.To overcome the problem, a new tool carrier was put forward. A moving tool holder could be combined freely on the base plate.So the tool changing trip is short, assembly is convenient. The processing efficiency is improved and the manufacturing cost is reduced.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮