文章摘要
教传艳,吴敬.车加工带凸台直管夹具设计[J].机床与液压,2017,45(16):207-208
车加工带凸台直管夹具设计
Fixture Design for Machining Convex Straight Pipe
  
DOI:10.3969/j.issn.1001-3881.2017.16.055
中文关键词: 夹具设计  车床  加工效率
英文关键词: Fixture design  Lathe  Processing efficiency
基金项目:
作者单位E-mail
教传艳 沈阳工学院机械与运载学院 wujingab@aliyun.com 
吴敬 沈阳工学院机械与运载学院  
摘要点击次数: 137
全文下载次数: 
中文摘要:
      设计夹具,变不能加工部位为可加工部位,扩大车床加工范围,提高加工效率。该设计采用6点定位,V形块支撑和夹紧,夹具操作简单,使用方便
英文摘要:
      A fixture was designed,the parts which could not be machined could be processed now,expanding the processing scope of the lathe,improving processing efficiency.In this design,6 point positioning ,V-shaped support and clamping were adopted.The fixture is simple operated and easy to use.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮