文章摘要
赵海霞,谭鹏,赵晓.基于AMESim的剪叉式升降台液压系统的设计与仿真[J].机床与液压,2017,45(16):87-90
基于AMESim的剪叉式升降台液压系统的设计与仿真
Design and Simulation of Hydraulic System about Scissor Lift Stage Based on AMESim
  
DOI:10.3969/j.issn.1001-3881.2017.16.024
中文关键词: AMESim仿真软件  剪叉式升降台  液压系统  建模与仿真
英文关键词: AMESim simulation software  Scissor lift stage  Hydraulic system  Modeling and simulation
基金项目:
作者单位E-mail
赵海霞 青岛科技大学机电工程学院 515534195@qq.com 
谭鹏 青岛科技大学机电工程学院  
赵晓 青岛科技大学机电工程学院  
摘要点击次数: 25
全文下载次数: 
中文摘要:
      以剪叉式液压升降台为研究对象,运用AMESim仿真软件建立其液压系统模型并进行仿真分析,得到剪叉式升降台的速度曲线、起落高度曲线,并与剪叉式液压升降台相应的计算数据相对比,验证了液压系统的可行性,发现了升降台机械部分设计的不恰当之处并提出了解决办法。
英文摘要:
      A scissor hydraulic lift stage was taken as the research object. AMESim simulation software was used for modeling and simulation analysis.The scissor lift stage’s velocity curve and its rise and fall curve were obtained by using AMESim.Practicability of the hydraulic system was tested and verified by comparing data which were acquired from relative calculations and AMESim analysis results. The inappropriate place of the mechanical part of the scissor lift stage was found and the solution method was given.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮