文章摘要
张勇,齐晓华.基于SINUMERIK 828D数控系统的数控机床螺距误差与反向间隙的测量与补偿[J].机床与液压,2017,45(16):199-202
基于SINUMERIK 828D数控系统的数控机床螺距误差与反向间隙的测量与补偿
Measurement and Compensation of Pitch Error and Backlashes for NC Machine Tools Based on SINUMERIK 828D
  
DOI:10.3969/j.issn.1001-3881.2017.16.052
中文关键词: SINUMERIK 828D数控系统  螺距误差  反向间隙  测量  补偿
英文关键词: SINUMERIK 828D NC system  Pitch error  Backlash  Measurement  Compensation
基金项目:
作者单位E-mail
张勇 郑州铁路职业技术学院机电工程系 hcrci@163.com 
齐晓华 郑州铁路职业技术学院机电工程系  
摘要点击次数: 55
全文下载次数: 
中文摘要:
      探讨了数控机床螺距误差和反向间隙的形成原理。针对采用西门子SINUMERIK 828D数控系统的数控机床,给出了测量数控机床位置偏差的运动程序,介绍了螺距误差和反向间隙测量和补偿的方法和步骤。
英文摘要:
      The formation principles of pitch error and backlashes of NC machine tools were discussed.Aiming at the NC machine tool equipped with SINUMERIK 828D system,the motion program used for measuring position error of the NC machine tools was listed, methods and steps compensating pitch error and backlashes were introduced.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮