文章摘要
耿玉豪,肖文生,崔俊国,张信杰,李尧.基于非线性PID的数控直线工作台位置控制[J].机床与液压,2017,45(16):152-155
基于非线性PID的数控直线工作台位置控制
Position Control of NC Linear Worktable Based on Nonlinear PID
  
DOI:10.3969/j.issn.1001-3881.2017.16.039
中文关键词: 数控工作台  位置控制  二元非线性PID控制
英文关键词: NC working table  Position control  Binary nonlinear PID control
基金项目:中央高校基本科研业务费专项资金资助项目(15CX02114A)
作者单位E-mail
耿玉豪 中国石油大学(华东)机电工程学院 gyh@s.upc.edu.cn 
肖文生 中国石油大学(华东)机电工程学院  
崔俊国 中国石油大学(华东)机电工程学院  
张信杰 中国石油大学(华东)机电工程学院  
李尧 中国石油大学(华东)机电工程学院  
摘要点击次数: 26
全文下载次数: 
中文摘要:
      数控直线工作台双闭环位置控制多采用PID算法,但是传统PID已不能满足高品质的控制要求。通过对现有控制器结构及性能进行分析,提出一种以偏差和偏差变化率为自变量的二元非线性PID的设计方法,用于速度环控制。通过Simulink仿真,对数控工作台外环的位置阶跃响应以及内环的转速跟踪性能进行对比分析。实验结果表明:提出的二元非线性PID控制器动态跟踪性能好,抗干扰能力强,从而使数控工作台的位置响应快速、稳定,证明了该方法的有效性。
英文摘要:
      PID algorithm is adopted in the double closed loop position control of the NC linear working table, but traditional linear PID can not meet the requirement of high quality control. Through analyzing the structure and performance of the existing controller, a design method of binary nonlinear PID was presented, with the error and error change as the as independent variables, which was applied to speed loop control. By simulink simulation, NC working table’s step response of position control and speed tracking performance of inner loop were analyzed. Experimental results indicate that, the proposed binary nonlinear PID controller has the advantages of dynamic tacking performance and capacity of resisting disturbance, making NC working table have quick and stable response, which proves the effectiveness of the proposed method.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮