文章摘要
萧金瑞,刘晓初,梁忠伟,刘长红,唐睿智.基于PLC的轴承强化研磨机控制系统设计[J].机床与液压,2017,45(16):148-151
基于PLC的轴承强化研磨机控制系统设计
Design of Bearing Reinforced Grinding Machine Control System Based on PLC
  
DOI:10.3969/j.issn.1001-3881.2017.16.038
中文关键词: PLC  强化研磨机  控制系统
英文关键词: PLC  Reinforced grinding machine  Control system
基金项目:国家自然科学基金-广东联合基金重点项目(U1601204);国家星火计划项目(2015GA780065);广东省科技计划项目(2017A010102014;2016A010102022);广东省研究生教育创新计划项目(2016SQXX14);广州教育系统创新学术团队项目(1201610013);广州市工业转型升级专项资金项目(穗工信函[2016]388号)
作者单位E-mail
萧金瑞 广州大学机械与电气工程学院 xjr640@163.com 
刘晓初 广州大学机械与电气工程学院  
梁忠伟 广州大学机械与电气工程学院  
刘长红 广州大学机械与电气工程学院  
唐睿智 广州大学机械与电气工程学院  
摘要点击次数: 103
全文下载次数: 
中文摘要:
      针对第一代强化研磨设备安全性能较差、加工效率较低、自动化程度不高等问题,设计基于S7 200smartPLC的轴承强化研磨机控制系统。该系统由输入层、CPU处理层和动作执行层组成,可实现复杂环境下的可靠控制,满足了轴承强化研磨机的功能要求,易于操作、界面友好、效果良好,为轴承套圈沟道强化加工提供了较好的解决方案。
英文摘要:
      Aiming at the problems of poor safety performance,low machining efficiency and low automation level of first generation reinforced grinding equipment, a bearing reinforced grinding machine control system based on PLC was designed. The system consisted of input layer, CPU processing layer and action execution layer. Reliable control could be realized under complicated environment and the requirement of bearing reinforced grinding machine could be satisfied with the control system. Furthermore, the system was easy to operate with friendly interface and good results could be gained, and a good solution was provided for bearing ring channel reinforced grinding.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮