欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
镁合金方形件分块压边液压拉深壁厚分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金项目(51271062);广西自然科学基金项目(2012GXNSFBA053147);广西教育厅科研项目(2013YB208);国家级大学生创新创业项目(201310605006);河池学院大学生创新创业训练计划项目(2013-12,2013-19)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于分块压边液压成形装置,运用Dynaform有限元软件对AZ31B镁合金方形件的液压成形过程进行了数值模拟。比较分析了镁合金板在整体式压边和分块式压边条件下的液压成形效果,重点研究了分块压边方式对镁合金方形件的壁厚影响规律,并探索了相对合理的压边力参数。研究结果表明:与整体式压边相比,采用分块式压边能有效改善AZ31B镁合金方形件的壁厚均匀性,提高其成形质量。

    Abstract:

    Based on hydraulic drawing device with segmental blank holder, the forming process of AZ31B magnesium alloy square parts in hydraulic deep drawing was simulated using the commercial FE software Dynaform. The forming effects of magnesium alloy sheet under unitary blank holder and segmented blank holder were analyzed. The influence of segmental blank holder on the thickness of the square parts was investigated systematically and the parameters of blank holder force were explored. The results show that compared with unitary blank holder, the wall thickness uniformity and forming quality of AZ31B magnesium alloy square parts can be obviously improved under segmented blank holder in hydraulic deep drawing at room temperature.

    参考文献
    相似文献
    引证文献
引用本文

毛献昌,杨连发,罗代宋,刘人毅.镁合金方形件分块压边液压拉深壁厚分析[J].机床与液压,2014,42(2):8-11.
.[J]. Machine Tool & Hydraulics,2014,42(2):8-11

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-24
  • 出版日期: