欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
不同进给速度对刀具三向振动影响的试验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过建立工件的振动力学模型,得出工件振动能量的解析公式。利用QLVC-ZSA1型振动信号分析仪,测试刀具在不同进给速度下的三向振动响应。试验结果表明:刀具在z方向的振动能量最大,且振动能量随着进给速度的增加而增大。

    Abstract:

    Based on the vibration mechanics model of workpiece,analytic formula for the vibration energy of the workpiece was obtained.By using QLVC-ZSA1 virtual vibration analyzer,the three-dimensional vibration response at different feed speed of the tool was tested.Test results indicate that the vibration energy in z direction of the tool is the biggest,and with the increasing of feed speed,the vibration energy increases.

    参考文献
    相似文献
    引证文献
引用本文

邵明辉,张强,李顺才.不同进给速度对刀具三向振动影响的试验研究[J].机床与液压,2014,42(11):84-85.
.[J]. Machine Tool & Hydraulics,2014,42(11):84-85

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: