欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于FANUCI/O-Link轴外围设备控制的刀库选刀程序设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为降低加工中心刀库选刀故障率,提出应用FANUC I/O-Link轴外围设备控制技术、通过伺服电机驱动刀盘分度与定位的方法,并对I/O-Link轴的功能指令格式与作用、地址分配、参数设定、PMC程序设计做了详细的介绍。经过机电联调,验证了基于I/O-Link轴的刀库选刀控制精准,可靠性高,换刀时间短。

    Abstract:

    In order to reduce the failure rate of tool selection from ACT on machining center, a technology based on FANUC I/O-Link axis peripherals was presented. The cutter disc was indexed and positioned by the servomotor. Then the format and function of the function instructions, address assignment, parameters setting and PMC program design were introduced. After electromechanical setting, higher positioning accuracy of the selected tool, higher reliability and shorter time of changing tool are realized.

    参考文献
    相似文献
    引证文献
引用本文

王元生.基于FANUCI/O-Link轴外围设备控制的刀库选刀程序设计[J].机床与液压,2014,42(14):150-153.
.[J]. Machine Tool & Hydraulics,2014,42(14):150-153

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: