欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于ICM拓扑优化的加工中心床身轻量化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重大数控专项资助(2010ZX04001-032)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为实现高速卧式加工中心床身的轻量化设计,以床身的质量最小化为目标,提出了基于ICM方法的拓扑优化模型。分别对床身进行了二维、三维拓扑轻量化设计,并对设计结果进行了可制造化处理,给出了床身优化后的仿真模型。基于有限元理论对新床身进行静动态性能分析。结果表明,在新床身具有良好的静动态性能的前提下,新床身比原床身质量减少了13%,实现了加工中心床身的轻量化设计。

    Abstract:

    In order to realize weight-reduction design of high-speed horizontal machining center bed, topological optimization model based on ICM method was proposed with a view to minimize the mass of the bed. The 2D and 3D topology weight-reduction design for the bed were respectively given, and manufacturability process for the design results and the simulation model of the bed after optimization were given. Static and dynamic performance analyses for the new bed were given based on finite element method (FEM). The results show that the weight of the new bed reduces 13% than the old bed in premises of the new bed with good static and dynamic performance, which can realize the weight reduction design of the machining center bed.

    参考文献
    相似文献
    引证文献
引用本文

任帅,宋冬冬.基于ICM拓扑优化的加工中心床身轻量化设计[J].机床与液压,2014,42(13):130-134.
.[J]. Machine Tool & Hydraulics,2014,42(13):130-134

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: