欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
薄壁零件的车削加工技术研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对薄壁零件加工中容易出现变形的特点,分析了薄壁工件车削中产生变形的原因并主要就薄壁零件的夹具设计提出相应的解决方案,同时列举了一些典型薄壁零件的夹具方案,作为工程实践中的参考。

    Abstract:

    Because of the rigidity, deformation is easily produced in thin-walled parts machining. It may be caused by clamping force, cutting force, heat in process,cutting chatter,and so on. The deformation in turning was focused on and some advices on fixture design were given.Some plans which were applied were given.

    参考文献
    相似文献
    引证文献
引用本文

肖利,孙朝海.薄壁零件的车削加工技术研究[J].机床与液压,2014,42(16):27-30.
.[J]. Machine Tool & Hydraulics,2014,42(16):27-30

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: