欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于LabVIEW的模切机监测系统设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省教育厅科学研究计划项目(2010219)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了基于LabVIEW的模切机监测系统的基本构成、软硬件设计方法和主要功能。该系统可以进行模切机各种状态信号的自动采集、显示、分析、存储。基于LabVIEW的模切机监测系统开发成本低、研制周期短、性能可靠,对模切机安全运行及故障诊断有重要的作用。

    Abstract:

    The basic configurations, software and hardware design methods and main functions of die-cutting machines monitoring system based on LabVIEW were introduced. This system can carry out automatic data acquisition, display, analysis and storage of various state signals of die-cutting machines. The monitoring system of die-cutting machines which is based on LabVIEW has the following advantages: low cost, short development cycle, reliablity. The development of the system is very importance to safety performance and failure diagnose of die-cutting machines.

    参考文献
    相似文献
    引证文献
引用本文

卢军民,王蕊,张平格.基于LabVIEW的模切机监测系统设计[J].机床与液压,2014,42(16):135-137.
.[J]. Machine Tool & Hydraulics,2014,42(16):135-137

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-01-28
  • 出版日期: