欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于Pro/Toolkit二次开发机床零件参数化变形研究与实现
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然基金资助项目(51365010)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对使用Pro/E 4.0 软件自身创建机床零件模型效率不高、模型重复利用率低、不能智能查错等问题,介绍了在Pro/E 4.0环境下,采用Pro /Toolkit 二次开发技术和参数化设计机床零件的方法,同时加入了智能检查,使其能够规避错误。并利用MFC编程予以实现,具有一定的实际意义。

    Abstract:

    Aiming at the problems of the low efficiency using Pro/E 4.0 software to create machine parts models,low reuse rate of models,can not find error intelligently, Pro/Toolkit second development technology and parametric design method were used to design machine parts models under Pro/E 4.0. At the same time, intelligent inspection was added into the system.It was realized by using MFC programming and it had practical significance.

    参考文献
    相似文献
    引证文献
引用本文

史晓航,牛秦洲.基于Pro/Toolkit二次开发机床零件参数化变形研究与实现[J].机床与液压,2014,42(22):1-4.
.[J]. Machine Tool & Hydraulics,2014,42(22):1-4

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: