欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于模态实验的机床进给系统研究与分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年科学基金资助项目(51205235)


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于模态分析理论,应用锤击法对机床进给系统进行了实验模态分析。研究了该机床进给系统的动态特性,获得了该机床进给系统的固有频率、阻尼比和模态振型。通过对机床进给系统各阶模态振型的分析,找到了结构的薄弱环节,并为进行机构优化设计提出了改进措施。

    Abstract:

    Based on the modal analysis theory, the experimental modal analysis of the machine tool feed system was made by using hammerhitting method. Dynamic characteristics of the machine tool feed system were studied, and its natural frequencies, damper ratios and mode shape were also obtained. Through analysis of the mode shape of feed system at each stage, its structural weaker parts are found, and the suggestion of improvement is provided for the optimization design of structure.

    参考文献
    相似文献
    引证文献
引用本文

葛双好,张蔚波,王佩凤,魏南.基于模态实验的机床进给系统研究与分析[J].机床与液压,2015,43(1):37-40.
.[J]. Machine Tool & Hydraulics,2015,43(1):37-40

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: