欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于加工中心的大尺寸深腔之精加工方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对于尺寸较大的配合型腔的精加工,可先加工出四周内壁之间的圆弧过渡部分,再分别对内壁和底面进行粗加工和精加工,最后加工底面圆角。具体分析了每一环节可能出现的问题,并提出切实可行的加工办法和操作技巧。

    Abstract:

    When largesized cavity cooperated with mould was finished, the circular arcs between side walls should be machined first, and then the walls and the bottom were finished, at last the round corners between the bottom and walls were finished. Especially, problems that may occurred during the processing were analyzed, and effective methods and techniques were put forward.

    参考文献
    相似文献
    引证文献
引用本文

郭伟民.基于加工中心的大尺寸深腔之精加工方法[J].机床与液压,2015,43(2):47-48.
.[J]. Machine Tool & Hydraulics,2015,43(2):47-48

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: