欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于AMESim混砂车排砂泵液压系统的动态特性仿真分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在分析混砂车排砂泵液压控制系统的基本结构和工作原理的基础之上,利用仿真软件AMESim对“MISSION”10"×8"×14"排砂泵液压驱动系统进行建模和仿真。针对混砂车排砂泵液压控制系统在负载波动及转动惯量变动的情况下,对系统进行动态仿真。结果表明:该系统具有良好的动态性和可靠性,能够满足压裂工况的要求。

    Abstract:

    The modeling and simulation of “MISSION”10"×8"×14"hydraulic control system of flushing pump were finished by using AMESim simulation software after the working principle and basic configuration of hydraulic control system of fracturing blender truck's row sand pump being analyzed. The dynamic simulation of hydraulic control system was carried out, by aimed at the condition of load fluctuation and unstable moment of inertia on the system. The results show that the system has good dynamic capability and reliability, and can meet the requirements of fracturing and pressing conditions in the working process.

    参考文献
    相似文献
    引证文献
引用本文

唐美,刘维平,张可可,穆星星.基于AMESim混砂车排砂泵液压系统的动态特性仿真分析[J].机床与液压,2015,43(5):124-126.
.[J]. Machine Tool & Hydraulics,2015,43(5):124-126

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: