欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
剪式举升机自动调平系统设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某举升机调平回路操作困难、费时费力等问题,对调平回路进行改进设计,利用一个三位四通换向阀代替原系统中的两个手动补油截止阀,并借助原系统中的限位开关,通过开关触发信号的有序传递,实现了调平一键式完成,减小了劳动强度和误操作,提高了设备的使用寿命。

    Abstract:

    To improve the problems that the car lift leveling circuit operation is difficult, time-consuming and laborious, it was redesigned. A three-position fourway valve was used to replace two manual fill oil valve of the original system. the trigger signal orderly transfer was realized with the help of the limit switches of the original system, final operation with one key was achieved. The improved leveling circuit can reduce labor intensity and misoperation, improve the service life of equipment.

    参考文献
    相似文献
    引证文献
引用本文

李国慧,桂玉涛.剪式举升机自动调平系统设计[J].机床与液压,2015,43(8):99-100.
.[J]. Machine Tool & Hydraulics,2015,43(8):99-100

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-06-17
  • 出版日期: