欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
热轧管深孔镗滚加工的走偏问题剖析与结构优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175052)


Analysison Axial Deviation Problem and Structure Optimization for Boring and Rolling Deep Holes of Hot Rolled Pipe
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为控制孔轴线的偏斜,提高孔轴线的直线度精度,降低废品率,剖析了深孔镗滚加工中刀具走偏的根本原因,提出了合理设置刀具参数、提高刀具装配精度和支承刚度、优化支承套结构等措施,从而改善了加工质量,获得了较为满意的结果。

    Abstract:

    The fundamental reasons of the tool’s axial deviation were analyzed during boring and rolling a deep hole in order to control axial deviation of deep holes, improve precision of straightness of axial holes and reduce scrap rate. Some measures were taken such as setting up reasonable tool parameters, improving tool assembly accuracy and supporting rigidity, optimizing the structure of supporting bushing, and etc. Thereby the machining quality is improved, and very satisfactory results are gained.

    参考文献
    相似文献
    引证文献
引用本文

徐红丽,刘黎.热轧管深孔镗滚加工的走偏问题剖析与结构优化[J].机床与液压,2015,43(11):95-96.
. Analysison Axial Deviation Problem and Structure Optimization for Boring and Rolling Deep Holes of Hot Rolled Pipe[J]. Machine Tool & Hydraulics,2015,43(11):95-96

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-11
  • 出版日期: