欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
伺服飞剪系统的位置优化研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Optimal Design for Servo Flying Shear Position Control System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    飞剪轧件剪切精度很大程度上取决于位置控制效果。目前伺服飞剪系统在国内许多制造企业中广泛应用,传统位置环控制难以达到控制效果。针对工业实际飞剪系统具有强扰动、变参数等特点,结合黄石90 kW伺服系统飞剪改造工程实际情况,构造了一个阶梯型位置控制环,并利用模糊控制调节速度环PI参数从而对系统进行优化,实现对飞剪位置的更精确控制。结果表明:该系统快速响应能力强。实践证明基于模糊控制的飞剪系统具有良好的控制效果。

    Abstract:

    Shearing accuracy largely depends on the position control. The servo flying shear system is widely used in many domestic manufacturing enterprises, the traditional position control is hard to achieve the control effect. According to the actual situation of industry flying shear system with strong disturbance, variable parameters, combining with the transformation project of 90 kW servo system of flying shear, a ladder type position control loop was constructed, and the fuzzy control was used to optimize the system by adjusting the PI parameters to achieve more precise control to the flying shear position.The result shows that systems response is rapid. Practice has proved that the flying shear control system based on fuzzy control has a good control effect.

    参考文献
    相似文献
    引证文献
引用本文

刘锐,孔勇,刘惠康,张旭刚,符广林,张楚锋,梁祖欣.伺服飞剪系统的位置优化研究[J].机床与液压,2015,43(14):142-144.
. Optimal Design for Servo Flying Shear Position Control System[J]. Machine Tool & Hydraulics,2015,43(14):142-144

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: