欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
磨料水射流喷嘴结构参数对流场性能影响的仿真与研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Simulation on the Influence of Abrasive Water Jet Nozzle Parameters on Flow Field
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    建立后混合磨料水射流喷嘴可视化模型,利用FLUENT软件对喷嘴内固液两相流场进行仿真,分析管嘴内流场的速度以及管嘴结构对它的影响。为了达到理想的速度,混合腔长度应选择高压水喷嘴直径的40倍左右;聚焦管长度在60~70 mm之间最优;综合考虑速度及磨损,锥形角角度应选择在30°~ 45°之间。

    Abstract:

    Based on Eulerian multiphase model of multiphase flow, using FLUENT software, the dynamic performance of the interior flow inside postmixed abrasive water jet nozzle was simulated,the relation between the speed of abrasive water and the design parameters of the nozzle was analyzed. In order to achieve ideal speed, the length of mixing cavity should be approximately 40 times of the water nozzles diameter; the length of the tube should be between 60~70 mm; considering speed and abrasion of the nozzle wall, the angle should be between 30°~45°.

    参考文献
    相似文献
    引证文献
引用本文

曹国强,肖咏,李东明,宋德阳.磨料水射流喷嘴结构参数对流场性能影响的仿真与研究[J].机床与液压,2015,43(14):91-93.
. Simulation on the Influence of Abrasive Water Jet Nozzle Parameters on Flow Field[J]. Machine Tool & Hydraulics,2015,43(14):91-93

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: