欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
深海集成油压动力源的传动不对中研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家863科技项目(2012AA091100)


Research of Misalignment Transfer of Deepocean Integrated Hydraulic Power Source
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以深海集成油压动力源的12 kW系列为研究对象,选用9齿渐开线花键作为动力源传递动力的载体。讨论传动在存在一定平行不对中和角度不对中的情况下,花键的啮合宽度对传动应力的影响。结果表明:当啮合齿宽减小到一定值时,由于啮合面的减小,传动应力会达到或超过材料的许用应力的极值;当啮合齿宽增大到一定程度时,由于不对中的存在,使得花键的局部会达到或超过材料许用应力的极值。于是存在这样一个齿宽,使得花键在对中和存在一定不对中量的情况下,达到传动的最佳效果。

    Abstract:

    The research object of the essay is 12 kW series of deepocean integrated hydraulic power souse.The influence of the splines mesh width to the transmission stress was discussed when the system exist parallel misalignment and angular misalignment.The results show that when the mesh width decreases to a certain value,the transmission stress will meet or exceed the allowable stress of the material because of the mesh surface being small.When the mesh width increases to a certain value,the stress of the splines local part will meet or exceed the allowable stress of the material.Therefore,there will be this mesh width which can make the spline transmission be the best condition when a certain misalignment is exist.

    参考文献
    相似文献
    引证文献
引用本文

陆钧成,柯坚,刘桓龙,王国志,蒋超猛.深海集成油压动力源的传动不对中研究[J].机床与液压,2015,43(15):88-90.
. Research of Misalignment Transfer of Deepocean Integrated Hydraulic Power Source[J]. Machine Tool & Hydraulics,2015,43(15):88-90

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: