欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于刀具内冷孔喷射的MQL流量控制研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重大科技专项(2013ZX04001-021)


Research on Flow Control of Minimum Quantity Lubrication Based on Tool Center Cooling
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    微量润滑技术(MQL)越来越普及,而流量控制及油雾排放情况也成为研究重点。提取某机床5年以来微量润滑的用油量及排放效果,分析MQL流量控制的方法和混配比例,总结出各种切削条件下切削油用量标准。

    Abstract:

    The minimum quantity lubrication (MQL) technique is becoming increasingly popular due to the safety of environment.Flow control and oil mist emission are the research emphases.Taking the oil quantity and exhaust result of MQL of a machine tool in recent 5 years as research object, the MQL flow control method and mix ratio were analyzed, oil dosage standards under various cutting conditions were summed up.

    参考文献
    相似文献
    引证文献
引用本文

张云,张志军,方岳文.基于刀具内冷孔喷射的MQL流量控制研究[J].机床与液压,2015,43(14):1-2.
. Research on Flow Control of Minimum Quantity Lubrication Based on Tool Center Cooling[J]. Machine Tool & Hydraulics,2015,43(14):1-2

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-24
  • 出版日期: