欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
空泡应用于管道内粒子移除的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

Project supported by the National Nature Science Foundation of China (51165005), and the International Cooperation Project of Jiangxi Province of China (20132BDH80001)


Particle removal by an oscillating bubble in the pipe
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了刚性管道中粒子在振动空泡的作用下移除的过程,振动空泡由一个55 V的低压电路产生。高速相机记录了空泡作用下粒子的动力学行为及空泡的形状变化过程,高速相机的帧率设为15 000 f/s。结果表明:粒子的移除速度受空泡产生的初始位置和空泡在管道中的轴向长度的影响。

    Abstract:

    In the paper, particle was removed in the pipe by an oscillating bubble. The bubble was generated using a very low voltage of 55 V. The dynamic behavior of the particle and the shape change of the oscillating bubble were recorded using a high-speed video camera, and the images were captured at a speed of 15000 f/s (frames per second). The experimental results show that the velocity of the particle is dependent on the bubble initial position and the bubble length along the pipe.

    参考文献
    相似文献
    引证文献
引用本文

徐明,胡国良,邹俊,吉晨.空泡应用于管道内粒子移除的研究[J].机床与液压,2014,42(18):12-16.
. Particle removal by an oscillating bubble in the pipe[J]. Machine Tool & Hydraulics,2014,42(18):12-16

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-04-21
  • 出版日期: