欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
碳纤维复合材料轴的承弯性能试验研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

连云港高新企业科研基金资助项目(20132h0025)


Experimental Study of Carbon Fiber Composite Shaft Antibending Capability
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对碳纤维复合材料轴的承弯特性,设计了两种不同铺层方式的承弯轴,并采用了ANSYS有限元分析软件对轴的承弯性能进行了仿真,得到设计的承弯轴能够满足扭转性能,并获得了承弯轴的弯曲强度及最大模量。根据设计的两种铺层研制了碳纤维复合材料轴,并进行了承弯性能的试验。试验结果表明:碳纤维复合材料轴的理论仿真与试验误差较小, ±45°铺层多的轴相对于90°铺层多的轴的承弯性能更好。

    Abstract:

    According to the bending characteristics of carbon fiber composite shaft, two different plies of the shafts were designed, and the finite element analysis software ANSYS was used in shaft antibending capability simulation, the bending strength and the maximum modulus of the shaft were acquired. According to the two plies, carbon fiber composite shaft were made, and experiments were taken. The results of the experimental show that the differences between Carbon fiber composite shafts’ theoretical simulation and experimental results is small; ± 45° ply is better than 90° ply in antibending capability of carbon fiber composite shaft.

    参考文献
    相似文献
    引证文献
引用本文

吴向春,岳金,杨沫,徐艳,张锦光,刘灿,张伟明.碳纤维复合材料轴的承弯性能试验研究[J].机床与液压,2016,44(1):84-87.
. Experimental Study of Carbon Fiber Composite Shaft Antibending Capability[J]. Machine Tool & Hydraulics,2016,44(1):84-87

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-04-07
  • 出版日期: