欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于栅格法的桥式起重机路径规划技术研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research of Bridge Crane Path Planning Technology Based on Grid Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    原有的桥式起重机路径规划算法完全仿照智能机器人路径规划的方法,得到的最优路径在实际应用中不能满足人们的需求,自动转载消耗的时间比人工手动转载还要长。在分析桥式起重机运行系统的特点后,通过栅格法限制最优路径的转角角度,同时将路径的拐点数转换为长度,最终得到了用时最短的最优路径。通过仿真和实验,并与原有的方法相比较,证明了改进的算法能够在路径规划环节提高桥式起重机自动转载的效率。

    Abstract:

    Original bridge crane exactly likes intelligent robot path planning algorithm of road king planning method, and the gotten optimal path can not satisfy peoples needs in the practical application, which leads to the consumption of automatic transfer time longer than manual transfer. After analyzing the characteristics of bridge crane operation system, through the grid method to limit the optimal path of corner angle, at the same time, converted inflexion point number to a length of the path, finally the shortest optimal path was gotten. Through the simulation and experiment, and compared with the original method, it proves that the improved algorithm can improve the efficiency of bridge crane automatic transfer in the link of path planning.

    参考文献
    相似文献
    引证文献
引用本文

魏云平,强宝民,晁苏全,杨必根.基于栅格法的桥式起重机路径规划技术研究[J].机床与液压,2016,44(15):23-25.
. Research of Bridge Crane Path Planning Technology Based on Grid Method[J]. Machine Tool & Hydraulics,2016,44(15):23-25

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-09-13
  • 出版日期: