欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于COMSCC4015的并联型步进控制器的设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2014浙江省自然基金项目(LY14E050001)


Design of a General Purpose Step Controller Based on CMOSCC4015
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出一种基于移位原理的并联型步进控制器的设计思路,该步进控制器以CMOSCC4015集成电路组成的“1”型环形移位器为核心,配合控制器输入/输出电路、移位器控制端电路等,共同实现并联结构顺序控制要求。实际应用表明:该控制器具备可编程序控制器(PLC)性能稳定、故障率低、能耗少、体积小、成本低等优点,控制器外围线路连接简单,使用方便、容易掌握,在单机自动化设备的步进控制中有较好的推广价值。

    Abstract:

    The design way of the parallel stepping controller was put forward based on shift principle. The controller core was CMOSCC4015 integrated circuit (IC) circular shifter. With controller input / output circuit and a shifter circuit terminal control, the parallel structure sequence control requirements were achieved. The practical application shows that the controller has the advantages of stable performance, low failure rate, low energy consumption, small size, low cost and so on; controller peripheral circuit is simple, easy to use, easy to master. In the control of the single machine automation equipment, it has better promotion value.

    参考文献
    相似文献
    引证文献
引用本文

徐锋,金珍珍,林海波.基于COMSCC4015的并联型步进控制器的设计[J].机床与液压,2017,45(4):188-191.
. Design of a General Purpose Step Controller Based on CMOSCC4015[J]. Machine Tool & Hydraulics,2017,45(4):188-191

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-05-09
  • 出版日期: