欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
弯管接头车床加工螺纹夹具设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Elbow Lathe Processing Thread Fixture Design
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过设计使用简单的夹具,解决了加工中的问题,提高了加工效率。利用零件本身的弯管部位和夹具上孔构成轴孔定位,利用零件本身的孔与夹具上削边销构成销孔定位,通过夹具使零件回转中心与车床回转中心重合,实现切削条件。夹具制造成本低,使用方便,有效保证了加工质量。

    Abstract:

    By designing a simple jig, the problems in processing were solved, improving the processing efficiency. Pipe bending part of the component and fixture holes were formed holeshaft location, hole in the part and the cutting edge pin on the fixture were formed pin hole positioning.Through the fixture,the parts rotary center was coincided with the lathe rotary center,to realize the cutting condition. The fixture has low manufacturing cost and simple operation, the machining quality is ensured effectively.

    参考文献
    相似文献
    引证文献
引用本文

教传艳,吴敬.弯管接头车床加工螺纹夹具设计[J].机床与液压,2017,45(14):179-180.
. Elbow Lathe Processing Thread Fixture Design[J]. Machine Tool & Hydraulics,2017,45(14):179-180

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-02-09
  • 出版日期: