欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
液压与润滑站矿物油型工作介质温控策略的研究
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北科技师范学院博士启动基金与河北科技师范学院研究生部精品课程及案例库项目;河北省研究生示范课程和专业学位教学案例(库)项目;河北科技师范学院校级重点教研项目(JYZB201707);河北省新工科研究与实践项目


Study on the Temperature Control of the Working Medium in the Metallurgical Hydraulic System and Lubrication System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    矿物油型工作介质广泛用于液压站与润滑站,其温度控制是一个重要的工程问题。在分析大型液压站、润滑站矿物油型工作介质温度控制准则的基础上,阐明工作介质温控系统的时变和大惯性特点。为了改善控制效果,提出在系统中采用基于径向基函数神经网络模型的新型PID控制策略。该控制策略经工程验证,达到最佳控制目标,收到良好效果。

    Abstract:

    Mineral oil type working medium is widely used in hydraulic station and lubrication station,and its temperature control is an important engineering problem.On the basis of analyzing the temperature control rules of mineral oil type working medium in large hydraulic station and lubricating station,the time variation and large inertia characteristics of the working medium temperature control system were expounded.In order to improve the control effect,a new PID control strategy based on the radial basis function neural network model was proposed.The control strategy was verified by the gineering project,to achieve the best control objectives,and good results were achieved.

    参考文献
    相似文献
    引证文献
引用本文

刘雅俊,史露露,兰中旭,华长春.液压与润滑站矿物油型工作介质温控策略的研究[J].机床与液压,2018,46(4):124-126.
. Study on the Temperature Control of the Working Medium in the Metallurgical Hydraulic System and Lubrication System[J]. Machine Tool & Hydraulics,2018,46(4):124-126

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-05-09
  • 出版日期: