文章摘要
李一浩,杨齐寿,黄俊,陈鹿民.纵切机床导套中弹簧夹头定心精度的有限元分析与优化[J].机床与液压,2018,46(4):37-40
纵切机床导套中弹簧夹头定心精度的有限元分析与优化
Optimization of Centering Accuracy of Spring Collect in Guide Sleeve Mechanism of Swiss Type Machine Tool by FEM
  
DOI:10.3969/j.issn.1001-3881.2018.04.010
中文关键词: 纵切机床  定心精度  弹簧夹头
英文关键词: Swiss type machine tool  Centering accuracy  Spring collect
基金项目:郑州轻工业学院博士基金项目(2013BSJJ031)
作者单位E-mail
李一浩 郑州轻工业学院机电工程学院 yehao88_s@126com 
杨齐寿 郑州轻工业学院机电工程学院  
黄俊 郑州轻工业学院机电工程学院  
陈鹿民 郑州轻工业学院机电工程学院  
摘要点击次数: 100
全文下载次数: 
中文摘要:
      为改善纵切机床导套定心精度,对导套中弹簧夹头的定心精度模型进行理论分析,研究弹簧夹头卡爪与旋转套的接触位置对导套定心精度的影响程度,并用有限元方法对弹簧夹头的锥角进行优化,优化后的锥角为32092°,使其卡爪接触位置更加靠近前端,提高了纵切机床的加工质量。
英文摘要:
      By the analysis of centering accuracy model of spring collect in the guide sleeve of CNC swiss type machine tool,it was obtained that the contact position between the spring collect claw and the rotary sleeve was an important factor that affected the precision of the centering guide sleeve.Through the finite element method,cone angle of spring collect was optimized,and centering accuracy of spring collect was improved.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮