欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
低压悬臂铸造机开合模电机的同步控制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

2016内蒙古自治区科技创新引导奖励资金项目;2016内蒙古自然科学基金项目(2016MS0539)


Synchronous Control of Low Pressure Cantilever Casting Mold Machine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    铸造机的开、合模精度对铸件的质量和成品率影响极大,传统铸造机在开、合模动作控制时会产生一定同步误差。为了提高铸造机的生产效率、降低废品率,基于SIMOTION D435运动控制器,使用SIMOTION SCOUT工程软件对某自主研发的型号为ZBX500150新型低压悬臂铸造机开合模的运动控制进行同步优化。结果显示:这种方法能够有效提高铸造机开合模同步运动的精度,大幅提高铸件质量。

    Abstract:

    Open and close mold precision of die casting machine influence casting quality and yield greatly.Traditional casting machine has certain synchronization errors in the motion control of open and close of mold.In order to improve the casting machine production efficiency,to reduce the reject rate,synchronous optimization for motion control of independent researched ZBX500150 low pressure cantilever casting machine was made using SIMOTION SCOUT engineering software.The results show that this method can effectively improve synchronous motion accuracy of the mold casting machine,greatly improving the quality of castings.

    参考文献
    相似文献
    引证文献
引用本文

陈金金,毕俊喜,智伯雄.低压悬臂铸造机开合模电机的同步控制[J].机床与液压,2018,46(8):119-121.
. Synchronous Control of Low Pressure Cantilever Casting Mold Machine[J]. Machine Tool & Hydraulics,2018,46(8):119-121

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-05-16
  • 出版日期: