文章摘要
唐越,杨泽,王勇勤.结晶器振动系统机电液协同仿真技术研究[J].机床与液压,2018,46(7):118-122
结晶器振动系统机电液协同仿真技术研究
Study on Mechanical-Electrical-Hydraulic Co-Simulation Technology of Mould Vibration System
  
DOI:10.3969/j.issn.1001-3881.2018.07.027
中文关键词: 结晶器  振动  ADAMS  协同仿真
英文关键词: Mould  Vibration  ADAMS  Co-simulation
基金项目:
作者单位E-mail
唐越 成都航空职业技术学院 tangyue_2006@126.com 
杨泽 成都航空职业技术学院  
王勇勤 成都航空职业技术学院  
摘要点击次数: 112
全文下载次数: 
中文摘要:
      连铸机铸坯质量的好坏与结晶器振动系统的工作性能关系密切,应用ADAMS建立了结晶器振动系统刚柔耦合机械模型,并在MATLAB中根据机械电气液压的关系,搭建了控制框图,利用软件之间的接口建立了结晶器振动系统协同仿真模型,并对正弦和非正弦信号下的结晶器动态响应进行了分析,该方法可以为冶金机电液设备的设计与优化提供理论指导。根据现场测试的数据,对振动系统刚柔耦合机械模型进行了验证,结果表明所建立的模型是正确的。
英文摘要:
      The quality of continuous casting machine has a close relationship with the working performance of the mould vibration system. ADAMS is used to establish the mould vibration mechanical model of rigid-flexible coupling system. The control block diagram was set up according to the mechanical and electrical hydraulic relations in MATLAB. The co-simulation model of mould vibration system was established by the interface between the software. The dynamic response of mould under sinusoidal and non-sinusoidal signals was analyzed. This method could provide theoretical guidance for the design and optimization of metallurgical hydraulic mechanical and electrical equipment. According to the field testing data, vibration system of rigid flexible coupling mechanical model is verified, which results show that the model is correct.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮