文章摘要
杨绪啟,姚巨坤,田欣利,江宏亮.平面碳化硅深切削缓进给磨削力的正交试验研究[J].机床与液压,2018,46(11):96-100
平面碳化硅深切削缓进给磨削力的正交试验研究
Orthogonal Experiment Research on Cutting Deeply and Feed Slowly Grinding Force of Plane SiC
  
DOI:10.3969/j.issn.1001-3881.2018.11.022
中文关键词: 平面碳化硅  单颗粒平均磨削力  最小二乘法
英文关键词: Plane SiC  Single particle average grinding force  Least square method
基金项目:国家自然科学基金资助项目(51475474)
作者单位E-mail
杨绪啟 装甲兵工程学院装备再制造技术国防科技重点实验室 yangxuqi123@sina.com 
姚巨坤 装甲兵工程学院装备再制造技术国防科技重点实验室  
田欣利 装甲兵工程学院装备再制造技术国防科技重点实验室  
江宏亮 装甲兵工程学院装备再制造技术国防科技重点实验室  
摘要点击次数: 69
全文下载次数: 
中文摘要:
      基于裂纹扩展效应的平面碳化硅陶瓷切槽-推磨复合式加工技术是一种新型低成本、高效率的平面陶瓷加工技术,切槽加工是该技术的第一道工序。通过开展正交试验,重点研究了砂轮转速n、进给速度、切削深度对单颗粒平均磨削力的影响。在传统磨削力经验公式的基础上,在Eviwes80中用最小二乘法进行三元线性回归分析,建立了金刚石砂轮深切削缓进给碳化硅陶瓷磨削力模型,为上述工序提供了加工参数优选依据。
英文摘要:
      A new technique which called cutting and axial pushing-grinding process based on crack propagation of plane Silicon Carbide (SiC) is a kind of low cost, high efficiency processing on plane ceramics. Cutting process was its first step. By carrying out the orthogonal experiment, the research of influence law how three processing parameters such as grinding wheel speed n, pushing-grinding velocity,pushing-grinding depth,affect single particle average grinding force was laid special stress on. On the basis of the traditional empirical formula of grinding force,ternary linear regression analysis was carried out with the least square method (LSM) in Eviwes8.0,then establishing diamond wheel deeply cutting and slowly feeding ceramic average grinding force model, which provides a processing parameter optimization for the above process.
查看全文   查看/发表评论  下载PDF阅读器
关闭

分享按钮