欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
镍基高温合金短电弧加工工艺参数优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51365053);自治区科技人才培养项目资助(gn2015yx008)


Optimization of Process Parameters for Short Arc Machining of Nickel Base Superalloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了对短电弧加工镍基高温合金材料过程中的材料去除速度,表面质量和电极损耗等工艺目标进行综合评价,在新型数控短电弧铣床设备上对峰值电流、脉冲宽度、占空比和电压等可调工艺参数进行正交试验,并运用灰色理论进行试验数据的分析。将复杂多变的多工艺目标转换为单一评价指标,即灰关联度。该方法很大程度地简化了试验过程,最终得到最优工艺参数组合方案。试验结果表明:得到的参数组合能够在保证表面质量的前提下提高短电弧加工效率并降低电极损耗率。

    Abstract:

    In order to comprehensively evaluate the material removal rate, surface quality and electrode loss in the process of short arc machining nickel base superalloy, the orthogonal test of the adjustable process parameters of peak current, pulse width, duty cycle and voltage is carried out on the new type Numerical Control (NC) short arc milling machine. Experimental data were analyzed by using grey theory. The complex multi process target was transformed into a single evaluation index, i.e. grey relational grade. The test process could be greatly simplified by the method, and finally the optimal combination of process parameters was gotten. The experimental results show that the combination of parameters can improve the machining efficiency and reduce the electrode loss under the premise of ensuring the surface quality.

    参考文献
    相似文献
    引证文献
引用本文

许燕,王博,周建平.镍基高温合金短电弧加工工艺参数优化[J].机床与液压,2018,46(11):106-110.
. Optimization of Process Parameters for Short Arc Machining of Nickel Base Superalloy[J]. Machine Tool & Hydraulics,2018,46(11):106-110

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-06-27
  • 出版日期: