欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于MATLAB/GUI的直齿圆柱齿轮齿厚计算软件设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Software design for spur gear tooth thickness based on MATLAB/GUI
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在齿轮的测量和进一步的分析中,常用到分度圆以外的其他圆上的齿厚,传统的方法就是通过人工进行计算,计算量大,且易出错。为了解决以上问题,利用MATLAB/GUI功能,开发直齿圆柱齿轮齿厚计算软件,在MATLAB/GUI添加相应的控件,并在相应的回调函数中编写程序,以实现相应的计算功能。计算实例表明:本文设计开发的计算软件具有一定的实用价值。

    Abstract:

    As far as the gear measurement and analysis are concerned, the traditional way is to do large amount of calculation by using the artificial evaluation other than commonly used to divide the circular tooth thickness. In order to solve the above problems, this paper developed a straight tooth cylindrical gear tooth thickness calculation software to realize the corresponding computation functions by using the MATLAB/GUI function to add the corresponding controls. The calculation examples have shown that the design and development of this software has a certain practical value.

    参考文献
    相似文献
    引证文献
引用本文

侍红岩,吴晓强,单晓敏,迎春,张春友.基于MATLAB/GUI的直齿圆柱齿轮齿厚计算软件设计[J].机床与液压,2015,43(18):81-84.
. Software design for spur gear tooth thickness based on MATLAB/GUI[J]. Machine Tool & Hydraulics,2015,43(18):81-84

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-11
  • 出版日期: