欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
直齿锥齿轮摆线旋分加工数学模型及参数优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Mathematic model and parameters optimizing of cycloid rotational indexing machining of straight bevel gear
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对直齿锥齿轮加工方法间歇分度、生产效率低的问题,基于直齿锥齿轮摆线旋分加工方法,采用空间曲线逼近直线的数学方法解释直齿锥齿轮旋分加工原理。在此基础之上,给出摆线旋分加工数学模型,即切削点轨迹的数学模型,并分析影响参数,确定各参数范围及影响规律,进而获得符合加工要求的切削点轨迹。

    Abstract:

    For the problems of intermittent indexing and low production efficiency, the cycloid rotational indexing machining principle of straight bevel gear is explained using the mathematic method of the space curve approach to the straight line based on the method of cycloid rotational indexing. On this basis, the mathematic model of cycloid rotational indexing machining is given. This model is also named as the mathematic model of cutting point locus. Then, the influence parameters are analyzed. And the range of every parameter is confirmed, as well as, the effect laws of parameters are confirmed. And then, the cutting point locus meeting the machining requirment is obtained.

    参考文献
    相似文献
    引证文献
引用本文

赵桂芝,吴晓强,单晓敏,张春友.直齿锥齿轮摆线旋分加工数学模型及参数优化[J].机床与液压,2015,43(24):56-59.
. Mathematic model and parameters optimizing of cycloid rotational indexing machining of straight bevel gear[J]. Machine Tool & Hydraulics,2015,43(24):56-59

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-08-11
  • 出版日期: