欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于AMESim的间隙密封伺服缸位置控制参数优化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Parameter Optimization of Position Control of Gap Sealed Servo Cylinder Based on AMESim
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    活塞与缸筒之间的间隙值是间隙密封伺服液压缸设计的重要参数。分析阀控间隙密封伺服液压缸的数学模型,并在AMESim中建立模型,采用遗传算法对间隙值和位置控制参数进行优化。结果表明:间隙值是影响间隙密封伺服缸位置控制的关键因素;优化后的间隙值和控制参数能很好地提高位置控制的动态品质,并且泄漏量也较小。

    Abstract:

    The clearance between the piston and the cylinder is an important parameter for the design of the gapseal servo cylinder. The mathematical model of valvecontrolled gapseal servo cylinders is analyzed. A model was established in AMESim. The genetic algorithm was used to optimize the gap value and position control parameters. The results show that the gap value is the key factor affecting the position control of the gap sealing servo cylinder, and the optimized gap value and control parameters can improve the dynamic quality of position control well, and the leakage amount is also small.

    参考文献
    相似文献
    引证文献
引用本文

王锐,张祝福.基于AMESim的间隙密封伺服缸位置控制参数优化[J].机床与液压,2019,47(15):176-178.
. Parameter Optimization of Position Control of Gap Sealed Servo Cylinder Based on AMESim[J]. Machine Tool & Hydraulics,2019,47(15):176-178

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2020-03-12
  • 出版日期: