欢迎访问机床与液压官方网站!

咨询热线:020-32385312 32385313 RSS EMAIL-ALERT
基于ARM的嵌入式可重构数控系统的设计与实现
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Design and implement of embedded and reconfigurable CNC system based on ARM
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文提出了一种基于ARM嵌入式微处理器和大规模可编程逻辑器件FPGA的数控系统可重构硬件设计方法,并在此基础上,开发了经济型数控系统的原型样机,充分利用ARM微处理器的高速运算能力与FPGA的快速配置能力,大大减少了系统的外围接口器件,有效地降低了系统成本。

    Abstract:

    This article brings forward a hardware design method of reconfigurable CNC system based on ARM embedded microprocessor and field programmable gate array. And based on this method,we have developed a prototype of a low cost CNC system which takes full advantage of the high speed operation capability of ARM microprocessor and the high speed reconfiguration capability of FPGA. As a result,this prototype reduces the peripheral interface devices and cost greatly.

    参考文献
    相似文献
    引证文献
引用本文

孙恺,王田苗,魏洪兴.基于ARM的嵌入式可重构数控系统的设计与实现[J].机床与液压,2003,0(6):116-117,285.
SUN Kai, WANG Tian-miao, WEI Hong-Xing. Design and implement of embedded and reconfigurable CNC system based on ARM[J]. Machine Tool & Hydraulics,2003,0(6):116-117,285

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: